Adding a Sentek unit on the CropX App

Adding a Sentek unit on the CropX App

1: Using the green plus sign on the top right of your app, choose the option to add a sensor

2: Choose Sentek from the list

3: Select a field to install the sensor on

4: Confirm your GPS Coordinates

5: Select from the pick list the type of probe.  Enter in your probe ID and the telemetry ID. 
You can also choose the option to scan the QR code for the Telemetry ID. 
Also indicate what slot you used for the SDI-12 connection and click submit.

    • Related Articles

    • CropX rain gauge installation instructions

      For more information, please visit us online at CropX Rain Gauge Installation Video: Watch Now CropX Rain Gauge installation instructions Introduction This manual provides step-by-step instructions for installing a CropX rain gauge in ...
    • Sentek Installation Checklist

      To see a complete list open the installation prep modules on the Training site. Install Equipment Checklist ____ Charged Drill Batteries ____ 20V Drill ____ Install Kit ____ Auger Bit ____ Sockets for Install Kit Anchors ____ Knife/Scissors ____ ...
    • CropX Telemetry Guide

      External Images and Schematics Without optional solar panel With Optional Solar Panel Back of device Solar panel inlet Antenna connector Mounting slots Internal Schematics (with front panel open)
    • CropX Effluent Management Introduction Video