CropX Telemetry Guide

CropX Telemetry Guide

External Images and Schematics

Without optional solar panel

With Optional Solar Panel

Back of device

Solar panel inlet
Antenna connector
Mounting slots

Internal Schematics (with front panel open)

    • Related Articles

    • CropX rain gauge installation instructions

      For more information, please visit us online at CropX Rain Gauge Installation Video: Watch Now CropX Rain Gauge installation instructions Introduction This manual provides step-by-step instructions for installing a CropX rain gauge in ...
    • TerraSen Installation Guide

      TerraSen 50 installation guide TerraSen 20 in/50 cm 30 in auger Bar, twist tool Additional Tools: Hammer, ~one pound Bottle of water (optional) After selecting the proper site, use the auger to drill a pilot hole. Use the bar to stabilize the auger ...
    • Adding a Sentek unit on the CropX App

      1: Using the green plus sign on the top right of your app, choose the option to add a sensor 2: Choose Sentek from the list 3: Select a field to install the sensor on 4: Confirm your GPS Coordinates 5: Select from the pick list the type of probe. ...
    • CropX Effluent Management Introduction Video

    • Sentek Installation Checklist

      To see a complete list open the installation prep modules on the Training site. Install Equipment Checklist ____ Charged Drill Batteries ____ 20V Drill ____ Install Kit ____ Auger Bit ____ Sockets for Install Kit Anchors ____ Knife/Scissors ____ ...